Loading ...
Loading ...
Loading ...
power block
insert
receptacles
secure receptacles into
power block connectors
plastic
cover
connect
securely
power feed
Step #5: install receptacles
• Insert the electrical receptacles into the power block.
• Then secure each receptacle into the power block
connectors by pushing the receptacles away from the
middle of the rail assembly toward the posts.
IMPORTANT: Check that the receptacles are securely
connected to the power block by sliding them back
and forth.
Step #6: connect power feed to power block
• Remove the plastic cover from the base of the end post.
• Route the power feed up through the post and into the
rail assembly.
• Insert the connector on the power feed into the power
block.
• Coil the remaining power feed for safety.
IMPORTANT: Check that the power feed is securely
connected to the power block.
NOTE: The power feed may be connected to
or ceiling.
Loading ...
Loading ...
Loading ...