Loading ...
Loading ...
Loading ...
3
Before First Use
Because of long shipping time, sometimes espresso machine won't pump
water when you receive and use machine first time. The reason is there's
airblock develops in the water line. This can happen to any new machines, a
machine that had not been used for some time, or the machine had sucked in
air by accident.
To purge the air and resume the flow of water, please refer to the following
instructions:
2.
3.
4.
5.
6.
Add water to the water tank, filling to the MAX marking indicated. Then replace
the water tank onto the machine.
Plug in and press the "ON/OFF switch " to "I", and then press the power button.
At this time, the indicator light will flash. (if the indicator light is not on, turn the
steam knob to the OFF position)
Place cup under steam wand.
Turn the steam knob to , machine will start pumping.
After water comes out from the steam wand in a straight line, your machine is
ready.(If no water comes out, please check if Steam Knob is on the position)
1.
Lift the water tank from the machine, then remove the
stopper.
1.
3.
5.
7.
9.
11.
13.
15.
17.
Water Tank Lid
Steam Knob
On/Off Switch
Steam Button
One Cup Button
Drip Tray Grid
One Cup Filter Basket
Filter Holder
Portafilter
2.
4.
6.
8.
10.
12.
14.
16.
Water Tank
Steam Wand
Measuring Scoop/Tamper
Two Cup Button
Power Button
Drip Tray
Two Cup Filter Basket
Filter Retention Clip
Stopper
Loading ...
Loading ...
Loading ...