Loading ...
Loading ...
Loading ...
222
Electrical Diagram
Electrical diagram see label on main body of the actual product.
Trouble Shooting
Fault Cause Solution
Light on, but
motor does not
work
The blades are blocked.
The capacitor is damaged. Call Customer Support.
The motor is damaged.
Call Customer Support.
Call Customer Support.
Both light and
motor do not
work
Check power supply and house electrical outlets.
Light damaged.
Replace lights.
The motor is not tightly fastened.
The cooker hood is not tightly fixed.
The distance between the cooker
hood and the cooker top is too large.
Power cord loose.
Check power supply and house
electrical outlets.
Vibration
suction
The blade, if damaged, can cause
vibrating.
Call Customer Support.
Call Customer Support.
Check installation.
Readjust the distance: see requirements for
minimum and max distance on page 4.
Insufficient
The machine is
not level.
Disconnect power supply before
checking blades for obstruction.
Too much ventilation from open
doors or windows.
Choose a new place to install the
appliance or close some doors / windows.
The screws securing the hood into
the cabinet are not tight enough.
Tighten the screws securing the hood into
the cabinet and make it horizontal.
The screws securing the hood to
the rear wall are not tight enough.
Tighten the screws securing the hood to
the rear wall and make it horizontal.
The internal wiring of motor is cut off/
disconnected. An unpleasant smell
may be produced. Disconnect power
supply.
12
Loading ...
Loading ...
Loading ...