Makita XCU09Z User Manual

Loading ...

ENGLISH

If you cannot cut the timber right through with a

single stroke:

Apply light pressure to the handle and continue

sawing and draw the chain saw back a little.

When cutting thick branches, rst make a shal-

low undercut and then make the nish cut from

the top.

If you try to cut off thick branches from the

bottom, the branch may close in and pinch the

saw chain in the cut. If you try to cut off thick

branches from the top without a shallow under-

cut, the branch may splinter.

Bucking

Rest the chain saw body on the wood to be cut.

2. With the saw chain running, saw into the

wood while using the top handle to raise the saw

and the front one to guide it.

3. Continue the cut by applying slight pressure

to the top handle, easing the saw back slightly.

NOTICE: When making several cuts, switch

the chain saw off between cuts.

CAUTION: If the upper edge of the bar

is used for cutting, the chain saw may be

deected in your direction if the chain

becomes trapped. For this reason, cut

with the lower edge, so that the saw will be

deected away from your body.

Loading ...

Makita XCU09Z 36V 18V X2 LXT Brushless 16" Top Handle Chain Saw, Tool Only