Loading ...
Loading ...
Loading ...
Godiag Scan Tool User Manual V1.0
24
3 Common Special Services/Functions
This section gives brief instructions of the most commonly required service and maintenance
operations. Typical service operation screens are a series of menu driven executive commands.
Follow on-screen instructions to complete the operation.
Service and maintenance functionalities can be found under the main menu or Maintenance
menu,meanwhile they can be found under the specific control module.
Please upgrade in your tool when common special services/functions is expanded in the future.
3.1 Oil Light Service/Reset
a)If the service lamp is on, you must provide service for the car. After service, you need to reset
the driving mileage or driving time so that the service lamp turns off and the system enables the
new service cycle. b)After changing engine oil or electric appliances that monitor oil life, you need
to reset the service lamp.
3.2 ABS bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake
system to restore ABS brake sensitivity.
If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid
is replaced, the ABS bleeding function must be performed to bleed the ABS.
3.3 Battery matching
Use the car diagnostic device to reset the car battery monitoring unit to clear original fault
information about insufficient battery electric quantity, and match the battery again and monitor
battery based on current battery information.
Loading ...
Loading ...
Loading ...