Loading ...
Loading ...
Loading ...
SETTING QUICK OR POWERPLUS TM PREHEAT
The PREHEAT pad controls the Quick or PowerPlusTM
Preheat feature. The Preheat feature will bring the oven up
to temperature and then indicate when to place the food in
the oven. Use this feature when recipes callfor preheating.
Preheating is not necessary when roasting or cooking
casseroles.The oven can be programmed to preheat at any
temperature between :[70°F to 550°R Some food with short
cooking duration may need more cooking time.
To set the Preheat temperature for 375°F
1 Arrange the interior oven racks
2 Press PRENEAT "350" will appear in the display If a
preheat of 350°F is needed, press START
3 Press 3 7 5
4 Press START "PRE" will be displayed while the oven is
preheating
5 PressCANCEL when baking is complete or to cancel
the preheat feature
After the oven has reached the desired temperature (this
example, 375°F) the control will beep and the "PRE" light
will turn off, the BAKEfeature will activate and oven target
temperature will be displayed. If you missed hearing the
beep, you can tell that the oven has reached preheat
temperature if you see the oven temperature showing in
the oven display. Once the oven has preheated, place
food in the oven The preheat temperature can only be
changed while the "PRE" message is displayed
To change Preheat temperature while oven is
preheating (ex: changing from 375°F to 425°F)
If it is necessary to change the preheat temperature while
the oven is preheating to the original temperature:
1. While preheating, press PREHEAT. "375" will appear
in the display.
2. Enter the new preheat temperature. Press 4 2 5.
3 Press START "PRE" will be shown in the display
Note: A beep will sound once the oven temperature reaches
425°F and the display will show "425 °"
4 When baking is complete press CANCEL
SETTING BAKE
The BAKE pad controls normal baking If a rapid
preheating is preferred, refer to the POWERPLUS TM
PREHEAT feature for instructions. The oven can be
programmed to bake at any temperature from :WO°F to
550°R
Baking Tips:
- Preheat your oven before using the bake mode
- During preheat, the bake burner only is used to heat
the oven
- Use only one rack and center the pans as much as
possible on rack 2 or 3
- If using two racks, place the oven racks in positions 1
and 3
- Allow 2" to 4" (5,:[ to :[0,2cm) around the utensil(s)
for proper air circulation
- Be sure the pans do not touch each other, the door,
sides or back of the oven
To set the Bake Temperature to 375°F
:[ Arrange interior oven racks
2 Press BAKE, "350" will appear in the display If a
bake of 350°F is needed, press START
3 Press 3 7 5
4 Press START The actual temperature will be
displayed A beep will sound once the oven
temperature reaches 375°F and the display will show
,,375 °"
5 Place food in the oven
Pressing CANCEL will stop the feature at any time
To change the Bake Temperature
(example" changing from 375°F to 425°F)
:[ After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to
425°F, press BAKE and "375" will appear in the
display
2 Press 4 2 5
3 Press START
After 6 minutes, the convection fan will be activated during the first rise of temperature to allow the oven to reach its
target temperature faster
Loading ...
Loading ...
Loading ...