Loading ...
Loading ...
Loading ...
Network Camera User Manual
124
2. Check the checkbox of Enable to enable the function.
3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the change of
scene can trigger the alarm.
4. Click Arming Schedule to set the arming schedule. Refer to Task 2 Set the
Arming Schedule for Motion Detection in Section 10.1.1 for detailed steps.
5. Click Linkage Method to select the linkage methods for scene change, including
Notify Monitoring Center, Send Email, Upload to FTP/Memory Card/NAS, Trigger
Channel and Trigger Alarm Output.
6. Click Save to save the settings.
Configure Object detection
Purpose:
Object detection function detects the object appears in the monitoring scene, and
some certain actions can be taken when the alarm is triggered.
Steps:
1. Enter the Object detection settings interface, Configuration > Event > Smart
Event > Object detection.
2. Check the Enable Object detection checkbox to enable the function.
3. Check the checkbox of Enable Dynamic Analysis for Object detection, and then
the detected object is marked with green rectangle on the live video.
Note: To mark the detected object on the live video, go to Configuration > Local
to enable the Rules.
4. Click-and-drag the slider to set the detection sensitivity. The Sensitivity ranges
from 1 to 5. The higher the value is, the more easily the object can be detected.
5. Click Arming Schedule to set the arming schedule. Refer to Task 2 Set the Arming
Schedule for Motion Detection in Section 10.1.1 for detailed steps.
6. Click Linkage Method to select the linkage methods for object detection. Refer to
Task 3: Set the Linkage Method Taken for Motion Detection in Section 10.1.1.
Loading ...
Loading ...
Loading ...