Loading ...
Loading ...
Loading ...
Installation
Replacing the Doors
To replace the doors, follow the steps in Door and
Hinge Removal in opposite order.
IMPORTANT: If water line tube end is damaged, cut
off 5/8"before reconnecting.
Handles
To Install:
,
.
.
Align fresh food handle
with door clip.
Make sure the tabs of the
handle clip are below the
tabs of the door clip.
Rotate the handle so that
the handle is flat against
the door.
,
.
The tab on the lower part
of the handle will align
with the hole in the handle
cap.
Slide handle upward until
it clicks. (For freezer
handle, repeat steps 1-4,
then slide handle
downward until it clicks.)
To Remove:
1. Insert door removal card,
shipped with refrigerator (or
'/3;' thick plastic card similar
to a credit card) between the
handle and door panel
(approximately 3/4").
Note
• Wear gloves to protect your hands during removal
process.
2. Grasp the handle firmly and pull downward to
remove. (For freezer handle, repeat step 1, then
grasp the handle firmly and pull upward to
remove.)
10
Loading ...
Loading ...
Loading ...