Loading ...
Loading ...
Loading ...
10
LCDI POWER CORD AND PLUG
This air conditioner is equipped with an LCDI (Leakage Current Detection and
Interruption) power cord that is required by UL. This power supply cord contains
state-of-the-art electronics that sense leakage current. If the cord is damaged and
leakage occurs, power will be disconnected from the unit.
The test and reset buttons on the LCDI Plug are used to check if the plug is
functioning properly.
WARNING: Test LCDI before each use.
To test the plug:
1. Plug power cord into a grounded 3 prong outlet.
2. Press RESET (on some units a green light will turn on).
3. Press the TEST button, the circuit should trip and cut all power to the air
conditioner(on some units green light may turn off).
4. Press the RESET button for use. You will hear a click and the A/C is ready for
use.
5. The power supply cord must be replaced if it fails to trip when the TEST button
is pressed and the unit fails to reset.
NOTES:
• Do not use this device to turn the unit on or
off.
• Always make sure the reset button is
pushed in for correct operation
WARNING:
• The power supply cord must be replaced if
it fails to reset when either the test button is
pushed, or it cannot be reset.
• If power supply cord is damaged, it cannot
be repaired.
• It must be replaced by one obtained from
the product manufacturer.
WARNING – RISK OF FIRE
It is important the plug fits tightly into the wall outlet.
If the plug does not fit securely and appears loose, it should not be used.
Have a licensed electrician replace the receptacle.
II.Features and Components
1:Features
*Brand new appearance, compact structure, smooth line, simple and generous
shape.
*Functions of refrigeration, dehumidification, air supply and continuous drainage
*Outdoor interface is set high to facility assembly and keep the smooth flow of the
heat pipe.
*LED displays the control panel, beautiful and fashionable, with high-quality
remote control.It adopts a user-friendly remote control design.
*Air filtration capability.
*Timing switch function.
*Protection function of automatically restarting the compressor after three minutes,
a variety of other protection functions.
T h e M a x o p e r a t i o n t e m p e r a t u r e f o r t h e a i r c o n d i t i o n e r C o o l i n g :
35/24℃(95℉/76℉); Temperature operation range: 7-35℃ (45℉/95℉).
Loading ...
Loading ...
Loading ...