Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY:
temp/timer
cool auto
menergy severlhi
fan only lo
DO THIS;
PRESSAND HOLD
THE UP/DOWN
BUTTONS TOGETHER
FOR 3 SECONDS
FAULT CODES
temp/timer
YOU WILL SEE:
f
temp/timer
cool auto
menergy sever lhi
fan only lo
,. ®
,1
Note: The control is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius.
TO TURN UNIT OFF:
cool auto
menergy saver lhi
fan only lo
If the display reads "AS",
a sensor has failed. Contact
your Authorized Frigidaire
Service Center.
letup/timer
cool auto
energy saver hi
DO THIS;
I PRESSON/
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
• The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
• There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
, The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
AUGER WHEEL
Air Directional Louvers
Air directional louvers control air flow direction. Your air conditioner has the louver
type described below.
Auger Type
Rotate the Auger Wheel until the desired Left/Right direction is obtained.
@2009 Electrolux Home Products, Inc. All rights reserved.
Loading ...
Loading ...
Loading ...