Smeg FC20UXDNE 24 Inch Freestanding Bottom Mount Refrigerator with 12.5 cu.ft Capacity, LCD Display, Multiflow, Crisper Compartment, ECO Mode, Frost-free System and LED Lighting

INSTRUCTIONS FOR USE - Page 46

For FC20UXDNE.

PDF File Manual, 48 pages, Read Online | Download pdf file

FC20UXDNE photo
Loading ...
Loading ...
Loading ...
46
Problem: Cause or remedy:
Door is difficult to open: If you are trying to open the freezer door after just
having closed it, this could be difficult to do. As
you open the door, some cool air escapes from the
appliance and it is replaced by warm air from the
environment. When this air is cooled, negative pressure
is generated which results in problems as you try to
open the door. After a few minutes, the condition is
normalized and the door can be easily opened again.
Appliance sides are
warm.
This is normal. There are pipes and tubes installed
in the appliance sides, which tend to heat up
during appliance operation.
LED lighting does not
work:
If LED lighting does not work, call a service
technician.
Do not attempt a repair of the LED lighting yourself,
as there is danger of contact with high voltage!
HI will appear on the
display unit.
Door opened too frequently or too long.
Door not closed correctly (possible impurities on
the seal, misaligned door, damaged seal etc.).
An extended power supply failure.
Too much fresh food inserted at once.
PF will appear on the
display unit.
An extended power failure.
E0 will appear on the
display unit.
Sensor keys are not responding. Call a service
centre for repair.
Until the appliance is repaired by a service
technician, the appliance will operate in safe mode.
The appliance will automatically preserve the most
suitable temperature for each compartment.
E1 or E2 will appear on
the display unit.
Temperature sensor error or fault. Call a service
centre for repair. Until the appliance is repaired by a
service technician, the appliance will operate in safe
mode. The appliance will automatically preserve the
most suitable temperature for each compartment.
E9 will appear on the
display unit.
Door was open for too long. Close the door.
If the lighting in the compartment does not function
either, then there is a door sensor fault. Call a service
centre to arrange a repair. The appliance will operate
in safe mode until it is repaired. The appliance will
automatically preserve the most suitable temperature
for each compartment.
If the above tips do not resolve your problem, call the nearest authorized service
centre and state the type, model, and serial number indicated on the appliance
rating plate or label located in the appliance interior.
871530
Loading ...
Loading ...