INSTALLATION GUIDE - Page 2

For OB60SMPTDG1. Also, The document are for others Fisher & Paykel models: OB60SMPTNG1, OB60SMPTDB1, OB60SMPTNB1, OB60SM16PLG1, OB60SM16PLB1

Loading ...
2
!
WARNING!
Electric Shock Hazard
Failure to follow this advice may result in
electric shock or death.
Before carrying out any work on the
electrical section of the appliance, it must
be disconnected from the mains electricity
supply.
Connection to a good earth wiring system is
absolutely essential and mandatory.
Alterations to the domestic wiring system
must only be made by a qualified electrician.
!
WARNING!
Fire Hazard
Failure to follow this advice may result in
overheating, burning, and injury.
Do not use adapters, reducers, or branching
devices to connect this appliance to the
mains power supply.
!
WARNING!
Cut Hazard
Failure to use caution could result in injury.
Take care: some edges are sharp.
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to
change at any time. For current details about model and specification availability in your country,
please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.
WARNING!
To avoid hazard, follow these instructions carefully before installing or using this appliance.
Please make this information available to the person installing the appliance—doing so could
reduce your installation costs.
This appliance must be installed and connected to the mains power supply only by a
suitably qualified person according to these installation instructions and in compliance
with any applicable local building and electricity regulations. Failure to install the appliance
correctly could invalidate any warranty or liability claims.
If the power supply cable is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person in order to avoid a hazard.
Isolating switch: make sure this oven is connected to a circuit which incorporates an
isolating switch providing full disconnection from the power supply in accordance with the
wiring rules.
The oven must be earthed.
Do not use adaptors, reducers or branching devices to connect the oven to the mains
electricity supply, as they can cause overheating and burning.
The appliance must not be installed behind a decorative door in order to avoid overheating.
Please take extra care not to damage the lower trim of the oven during installation. The
trim is important for correct air circulation and allows the door to open and close without
obstruction. The manufacturer does not accept any responsibility for damage resulting from
incorrect installation.
SAFETY AND WARNINGS
Loading ...
Loading ...
Loading ...