Loading ...
Loading ...
Loading ...
10
Setting the Temperature
• Adjustable temperature: 1°C to 18°C (34°F to 65°F)
• Set the desired temperature by pressing the corresponding buttons, to increase or to
decrease. Each press is a 1-degree increment. Once released, the set temperature will flash for
approximately 5 seconds then revert back to display the internal temperature.
• To view your set temperature, press either the or button once and LED display will flash
set temperature for 5 seconds.
• The appliance has the capability to display temperature in either Celsius or Fahrenheit. To
change the temperature scale, press and hold both buttons simultaneously for approx. 3
seconds.
NOTE: The temperature inside may vary slightly depending on where the stored items are located
(upper/middle or lower section).
Temperature Alarm Function
• If the internal temperature ≥30°C (86°F) for 2 hours, the high temperature alarm will be activated,
the LED will display "HH", the buzzer will sound continuously, the cooling system continues to
work. The display return to normal until the high temperature conditions is relieved.
• If the internal temperature is <0°C (32°F) for 1 hour, the low temperature alarm will be activated,
the LED will display "LL", the buzzer will sound continuously, the cooling system will stop
working. The display return to normal until the low temperature is relieved.
NOTES:
• It is normal that the cabinet shows “HH” or “LL” from time to time. If it occurs frequently or
lasts for a long time, you can restart the appliance by unplugging it, then re-plugging after 5
minutes. If the problem occurs again after restarting, please contact customer service.
• Before reconnecting the power, wait 3 to 5 minutes. Otherwise, you could damage your
appliance. If you attempt to start the appliance before the end of this time delay, the
appliance will not turn on.
• If you turn on the appliance for the first time or after a restart, or after it has been out of
operation for a long time, there may be a temperature difference between the temperature
inside the appliance and that on the LED display. This is a normal event caused by the
duration of the activation period. Leave the appliance turned on for several hours and the
temperatures will stabilize during operation.
Smart Control Mode
• When the door is opened, inner light automatically turns on, and the inner fan stops.
• When the door is closed, inner light automatically turns off.
• Door Open Alarm: When the door is opened more longer 5 minutes, an alarm will sound, and
the compressor and outer fan will stop working.
Force Quit the Smart Control Mode
Press and hold the buttons and simultaneously for 5 seconds, the small dot in the upper left
corner of the LED will illuminate.
• After quitting the smart control mode, the alarm will not sound when the door is open for more
than 5 minutes.
NOTE: The interior light can only be controlled by pressing the button .
• Press and hold the buttons and simultaneously for 5 seconds to re-enter the Smart control
mode.
Loading ...
Loading ...
Loading ...