Loading ...
Loading ...
Loading ...
Washer Symptom Possible/Cause Solution
Er, FL on digital display
• This code will appear if the washer has not reached the fill
level after 30 minutes during a wash or rinse fill.
• Make sure hot and cold water faucets are turned on.
• Make sure that the fill hoses are not kinked or twisted.
• Clean the screens in the water mixing valve and the filter
screens located at the faucet end of the fill hoses.
• Unplug the machine for 15 seconds to clear this code.
Er, nF on digital display
• The washer has not filled to the proper water level.
• No or very little change in water level has been sensed
within 5 minutes of the current fill.
• Make sure hot and cold water faucets are turned on.
• Make sure that the fill hoses are not kinked or twisted.
• Clean the screens in the water mixing valve and the filter
screens located at the faucet end of the fill hoses.
• Unplug the machine for 15 seconds to clear this code.
Er, OF on digital display
• This code indicates the washer has filled to the overflow
level.
• The machine will begin to attempt to pump water out if the
door is closed and locked.
• Foreign object trap in pump may be clogged. Clean the
trap. Refer to Maintenance section.
• If the code does not clear, unplug the machine and call for
service.
Er, PS on digital display
• The control has detected trouble sensing the water fill lev-
el.
• Unplug the machine and call for service.
Er, dU on digital display
• The control senses that the door will not unlock.
• Unplug the machine for three minutes to unlock the door.
• If the code appears again, call for service.
Er, dl on digital display
• This code indicates that the door has not locked.
• Make sure the door is closed all the way and try to start
the cycle.
• Open the door or unplug the machine to clear the code.
• If this code continues, call for service.
Table continues...
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
35 Part No. 808187ENR2
Loading ...
Loading ...