Loading ...
Loading ...
Loading ...
7
Exact dimensions may vary depending on type of range/cooktop
below.
*36" (914 mm) is recommended for 72" (1828 mm) installation
height.
**30" (762 mm) is typical for 66" (1676 mm) installation height.
***12" (305 mm) to 12.75" (320 mm) cabinets, the microwave
oven is bulge to the cabinet.
12.75" (320 mm) to 13" (330 mm) cabinets, the microwave oven
is flush to the cabinet.
NOTE: If cabinets are deeper
13" (33 cm) to 16" (40.6 cm),
use the bump out mounting kit
replacing the mounting plate
from the wall. The bump out
mounting kit (part#
W11630300) is not provided.
To order, see the “Online
Ordering Information” section
of the Quick Start Guide.
For other dimension's cabinet,
suggest select other Whirlpool
Products.
C
A
B
A. (Bump out)
13" ≤
DEEPER ≤
16"
B. Cabinet
C. Bump put
mounting bracket
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Observe all governing codes and ordinances.
Required:
� A 120 V, 60 Hz, AC only, 15 or 20 A electrical supply with a
fuse or circuit breaker
Recommended:
� A time-delay fuse or time-delay circuit breaker
� A separate circuit serving only this microwave oven
GROUNDING INSTRUCTIONS
For a grounded, cord-connected appliance:
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. This appliance is equipped with a cord having
an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded. Do
not modify the plug provided with the appliance: if it will not fit
the outlet, have a proper outlet installed by a qualified
electrician.
SAVE THESE INSTRUCTIONS
This device complies with Part 18 of the FCC Rules.
INSTALLATION
Prepare Microwave Oven Hood
Combination
WARNING
Excessive Weight Hazard
Use two or more people to move and install or uninstall
appliance.
Failure to do so can result in back or other injury.
1. To avoid possible damage to the work surface, cover the work
surface.
2. Remove cardboard plate from the outer foam in the carton. It
is for upper-cabinet and wall installation.
3. Remove the screw pack from the inner foam in the cavity.
4. Remove the damper from the inner foam in the cavity.
5. Remove the literature pack from the outer foam in the carton.
6. Remove shipping materials, tape and film from microwave.
7. Remove the mounting plate from the inner foam in the cavity.
8. Tape the microwave oven door closed so that the door does
not swing open while the microwave oven is being handled.
NOTE: To avoid damage to the microwave oven, do not grip or
use the door or door handle while the microwave oven is being
handled.
Loading ...
Loading ...
Loading ...