Loading ...
Loading ...
Loading ...
28 29
LAP BELT
LAP BELT
LAP AND
SHOULDER BELT
LAP AND
SHOULDER BELT
Pull the shoulder belt
J
tightly to remove all slack
from the lap portion of the
belt
K
, at the same time
use your full weight to
push down on the base.
Pull the seat belt
L
tightly
to remove all slack from
the lap portion of the belt
M
, at the same time use
your full weight to push
down on the base.
4
WARNING
6
5a
5b
Close the Lock-Off
O
until it
clicks into place.
Close the Lock-Off. While
holding the Lock-Off
P
down, close the Lock-Off
Release Tab
Q
until it clicks
into place and is flush with
the Lock-Off.
Make sure the vehicle belt is tight. Grab the base at the
areas
R
, as shown. If you can move the base more than
25 mm (1 inch) side-to-side or front to back the vehicle
belt is not tight enough. You will need to try again, or find
another location for your
convenience
base.
Close One Step Lock-Off
Close Two Step Lock-Off
Secure the base to your vehicle seat by routing
the vehicle seat belt through the openings
I
on
the sides of the base.
3
Note: Route any excess vehicle
belt across the belt path so it
will be under the Lock-Off.
I
I
J
M
L
K
O
P
Q
R
R
N
Note: If seat belt Stop
Button
N
interferes with
the Lock-Off, shift base to
the left or right in order to
prevent interference.
Loading ...
Loading ...
Loading ...