Home
Bookmarks
Home
Bosch
Bosch HSB736256E/03 User Manual
Page 6
Bosch HSB736256E/03 Serie 4 Gas range cooker
User Manual - Page 6
For HSB736256E/03.
PDF File Manual
,
8 pages
,
Read Online
|
Download pdf file
Safety precautions
: Risk of gas escape!
Before installing
Unpacking
Appliance classes - Fig. 1
Appliance dimensions - Fig. 2
Adjacent units - Fig. 3
Rating plate
Guidelines for ventilation
Note
Installation
Fitting the adjustable feet - Fig. 4
1. Remove all parts that are not permanently fixed, especially the pan supports and burners.
2. Remove the accessories from the oven.
3. Tilt the appliance by raising it slightly on one side from the floor.
4. Screw the adjustable feet into the mounting holes on the underside of the appliance.
Note
5. Only finally level the appliance when the electricity and gas have been connected, and all of the installation work has been completed.
Fitting the splash guard - Fig. 5
1. Remove the packaging and the protective film from the splash guard.
2. Loosen the two screws on the back of the appliance.
3. Place the splash guard into the holes intended for this purpose using the dowels.
4. Insert and tighten the bolts from below.
Electrical connection
Connecting the appliance to the power supply
Power cable with a plug with earthing contact
Gas connection
Gas connection on the appliance
Default setting of the burners
Gas connecting line with conical thread (EN 10226 R1/2) - Fig. 6a
1. Screw the angle (3) and the seal (2) to the gas connection (1)
2. Hold the angle (3) with a spanner and screw the adapter piece (5) and the seal (4) to the angle.
3. Hold the adapter piece (5) with a spanner and screw it to a fixed connecting line or a flexible gas connecting hose (6).
Gas connecting line with cylindrical thread (EN ISO 28 G1/2) - Fig. 6b
1. Screw the angle (3) and the seal (2) to the gas connection (1).
2. Hold the angle (3) with a spanner and screw it to a fixed connecting line or a flexible gas connecting hose (5) and the seal (4).
Flexible hoses - Fig. 7
Installing the safety valve
Checking for leaks
Initial use
Converting the gas type
Replacing the gas burner nozzles - Fig. 8
1. Disconnect the appliance from the electricity supply.
2. Remove the pan support.
3. Remove the burner cap A and burner cup B from the burner C (Fig. 8a).
4. Remove the nozzle D and replace it with an appropriate nozzle for the new type of gas (Fig. 8b).
5. Replace the old gas label with the new gas label.
6. Place the burner cup B onto the burner C.
7. Position the burner cap A exactly on top of the burner cup B (Fig. 8c).
8. Refit the pan support.
1. Switch on the gas burner.
2. Turn the control knob for the gas burner towards the small flame setting.
3. Remove the control knob for the gas burner.
4. Adjust the internal setting screw until a stable flame is burning correctly.
5. Loosen the setting screw to increase the gas flow or tighten it to decrease the gas flow.
Note
6. Refit the control knob for the gas burner.
General nozzle table
Note
Positioning and levelling
Positioning the appliance
Adjusting the appliance - Fig. 10
Note
Page 6/8
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Contents
Table of Contents
Search
Previous
Next
Bookmarks
Loading ...
Loading ...
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 67548000_hsb736256e-01.pdf
File size: 310.58 KB
File Language: English
Pages: 8
Author: Bosch
File created: 2013-12-05
Published: 2023-12-23
Updated: 2023-12-22
Download File
Table of Contents
×
Safety precautions
3
: Risk of gas escape!
3
Before installing
3
Unpacking
3
Appliance classes - Fig. 1
3
Appliance dimensions - Fig. 2
3
Adjacent units - Fig. 3
3
Rating plate
3
Guidelines for ventilation
4
Note
4
Installation
4
Fitting the adjustable feet - Fig. 4
4
1. Remove all parts that are not permanently fixed, especially the pan supports and burners.
4
2. Remove the accessories from the oven.
4
3. Tilt the appliance by raising it slightly on one side from the floor.
4
4. Screw the adjustable feet into the mounting holes on the underside of the appliance.
4
Note
4
5. Only finally level the appliance when the electricity and gas have been connected, and all of the installation work has been completed.
4
Fitting the splash guard - Fig. 5
4
1. Remove the packaging and the protective film from the splash guard.
4
2. Loosen the two screws on the back of the appliance.
4
3. Place the splash guard into the holes intended for this purpose using the dowels.
4
4. Insert and tighten the bolts from below.
4
Electrical connection
4
Connecting the appliance to the power supply
4
Power cable with a plug with earthing contact
4
Gas connection
4
Gas connection on the appliance
4
Default setting of the burners
4
Gas connecting line with conical thread (EN 10226 R1/2) - Fig. 6a
4
1. Screw the angle (3) and the seal (2) to the gas connection (1)
4
2. Hold the angle (3) with a spanner and screw the adapter piece (5) and the seal (4) to the angle.
4
3. Hold the adapter piece (5) with a spanner and screw it to a fixed connecting line or a flexible gas connecting hose (6).
4
Gas connecting line with cylindrical thread (EN ISO 28 G1/2) - Fig. 6b
4
1. Screw the angle (3) and the seal (2) to the gas connection (1).
4
2. Hold the angle (3) with a spanner and screw it to a fixed connecting line or a flexible gas connecting hose (5) and the seal (4).
4
Flexible hoses - Fig. 7
4
Installing the safety valve
4
Checking for leaks
4
Initial use
4
Converting the gas type
5
Replacing the gas burner nozzles - Fig. 8
5
1. Disconnect the appliance from the electricity supply.
5
2. Remove the pan support.
5
3. Remove the burner cap A and burner cup B from the burner C (Fig. 8a).
5
4. Remove the nozzle D and replace it with an appropriate nozzle for the new type of gas (Fig. 8b).
5
5. Replace the old gas label with the new gas label.
5
6. Place the burner cup B onto the burner C.
5
7. Position the burner cap A exactly on top of the burner cup B (Fig. 8c).
5
8. Refit the pan support.
5
1. Switch on the gas burner.
5
2. Turn the control knob for the gas burner towards the small flame setting.
5
3. Remove the control knob for the gas burner.
5
4. Adjust the internal setting screw until a stable flame is burning correctly.
5
5. Loosen the setting screw to increase the gas flow or tighten it to decrease the gas flow.
5
Note
5
6. Refit the control knob for the gas burner.
5
General nozzle table
5
Note
5
Positioning and levelling
5
Positioning the appliance
5
Adjusting the appliance - Fig. 10
5
Note
5
Search:
×
Search