Loading ...
Loading ...
Operating your Radiant Heater
WARNING
The heater must not be used if the glass tubes
are damaged
Do not use this heater with a programmer, timer,
separate remote-control system or any other device
that switches the heater on automatically.
CARE AND CLEANING
The heater requires regular cleaning to ensure
trouble free operation:
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the heater to remove dust and dirt.
The reflector body can be cleaned by using a dry
duster or soft brush through the grill, taking care not
to damage the glass tubes.
Never use solutions such as benzene, thinners or
polishing agents.
In order to get the maximum heat, the reflector must
be kept clean.
Use a vacuum cleaner to remove dust and fluff from
around the grills.
Ensure the heater is dry before plugging back into
the mains supply.
Do not attempt to dismantle the heater. There are
no user serviceable parts. For service or repair,
contact an authorised electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. (Refer to back of booklet).
WARNING Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
HEAT CONTROL SWITCH
The control switch positions are:
“0” = OFF
Red Button “I” = Low Heat
Black Button “I” = High Heat with Fan
Check that the heat control switch is set to Off
position before plugging the heater into the
mains supply.
The High Heat function will only operate in
conjunction with the Low Heat setting (Low Heat
must be turned on first).
For the High Heat setting with Fan, the fan
remains at one continual speed; only the
element changes to create the greater/lesser
heat output.
For greater economy, use the High Heat setting
initially and then switch to the Low Heat setting.
The fan will not operate in the Low Heat setting.
SAFETY DEVICE
A safety tip over device is built into the appliance
for added safety. This device will automatically
turn the appliance off if the appliance is not in
the appropriate operating position.
IMPORTANT! NEVER COVER THIS HEATER!
CAUTION
The Radiant Heater generates heat during use.
Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to
persons.
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the
unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
info@cdbgoldair.com.au
SUPPORT AND TECHNICAL ADVICE
Loading ...