Loading ...
Loading ...
Loading ...
18 19
CONVERSION LPG-NG
ONLY FOR GAS VERSION
1 - Close the gas
Before starting, make sure that the gas ow is
stopped. Then close the gas mains tap or the
LPG cylinder.
WARNING: The conversion must be performed by qualied technicians
when the oven has completely cooled down. Improper installation,
adjustment or maintenance can cause property damage or personal injury.
ONLY USE THE COMPONENTS
AND PARTS SUPPLIED BY ALFA FORNI.
The oven is supplied with LPG or natural gas. Follow the
instruction for the conversion. The LPG bottle is not included.
2 - Remove the gas knob
In order to remove the gas knob (A) it will be
sufcient to pull it with slight force. Follow the
direction of the arrow.
3 - Remove the gas tube
In order to disconnect the gas tube (B) you can
use a 24 wrench or suitable pliers.
4 - Remove the protective casing
In order to remove the protective casing (C) it
will be sufcient to remove the screws indicated
in the photo that secure it to the oven.
A
B
C
7 - Disconnect the ignition cable
At this point, looking sideways, you will have
access to the assembly unit and you can
disconnect the white ignition cable. You can
help yourself with tweezers by gripping the
black sheath.
8 - Identify the nozzle to be replaced
Once the burner is removed, you will see the
golden nozzle (F) that will need to be replaced.
9 - Remove the nozzle
In order to remove the nozzle, use an 11 wrench
by unscrewing the nozzle as if it were a normal
nut. Turn the wrench from top to bottom.
5 - Unlock the burner
In order to unlock the burner (D) simply
remove the screw indicated in the red circle.
Use a 4mm hex wrench.
6 - Remove the burner
Now remove the burner halfway, being careful
not to damage the ignition cable. (E)
D
E
F
10 - Resetting the burner
Now simply install (screw in) the new nozzle
and proceed in reverse from point 7 to point 2.
At rst start-up, check for any leaks.
If you are in North America, continue
with point 11 on the next page >>>
Loading ...
Loading ...
Loading ...