Loading ...
Loading ...
Loading ...
38
9. Tighten Belt
Place hand in child restraint.
Firmly push the child restraint
down and towards the vehicle
seat back while pulling the free
end of the belt to tighten.
It may be easier to pull back the
pad and pull the free end of the
belt parallel with the belt path as
shown.
10. Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
37
If it moves more than 1 in. (2.5 cm), you can try:
A. Pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to vehicle belt installation.
11. Secure Child in Child
Restraint
See pages 11-13.
8. Attach Lower Anchor
Hooks to Vehicle’s
Lower Anchors
Review your vehicle owner’s
manual for lower anchor loca-
tions and lower anchor belt use.
continued on next page
12. Recheck Level Lines
Make sure the child restraint
is reclined according to your
child’s weight.
Repeat steps 7-12 if not
reclined correctly.
You may need to place a large
rolled towel(s) or foam pool
noodle(s) under front of child
restraint to help achieve the
correct recline angle.
Check often to be sure padding
is still in place and the belt is
tight.
Loading ...
Loading ...
Loading ...