Loading ...
Loading ...
Loading ...
Installation
4
Please allow the grill to cool before you
begin the installation of your grill skin.
GRILL SKIN INSTALLATION INSTRUCTIONS:
1. Turn o gas/remove gas lines before moving
grill. Pull the grill out of the island or grill cart to
gain access to back of grill and place on a level,
sturdy surface. If unable to lift appliance and
cannot gain access to the back of grill, remove
hood following Figures A and B.
Be sure to recheck your gas ttings with a
soapy solution when you reinstall.
2. Open the hood as shown in Figure C.
3. Figure D: Remove the temperature gauge and
temperature back cover plate by unscrewing the
two screws holding the cover on, next remove
the two nuts holding the thermometer in place.
(Recommended: It is best to use a magnetic
socket wrench to ensure the nuts do not fall into
the grill hood.)
4. Figure E: Remove the hood handle by
unscrewing the two screws on the interior of the
grill hood. (Recommended: It is best to use a
magnetic screwdriver to remove screws from
handle to ensure nuts do not fall into the grill
hood.)
5. Assemble the stainless steel cover over the
existing hood as shown in Figure F. Handle the
cover with thick, heavy gloves as the edges may
be sharp. e cover will t very snugly against
the exterior of the hood.
Figure A
Figure B
Figure C
Figure D
Figure E
Figure F
Loading ...
Loading ...
Loading ...