Loading ...
Loading ...
Loading ...
operation en
29
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End" .
Note:If "Hot" appears, the appli-
ance cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
12.6 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→"Setting a programme", Page28
¡ The programme end time is set
and activated.
→"Buttons", Page22
1. Press Start/Reload .
The activated programme end time
is paused.
2. Press Finish in until the display
shows the required programme
end time.
3. Press Start/Reload .
The changed programme end time
is activated.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
1. Press Start/Reload .
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→"Display", Page20
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press Start/Reload .
12.8 Cancelling the pro-
gramme
1. Press Start/Reload .
2. Open the door.
3. Remove the laundry.
→"Unloading the laundry",
Page29
12.9 Unloading the laundry
1. Open the door.
2. Remove the laundry from the
drum.
12.10 Switching off the appli-
ance
▶ Turn the programme selector to .
12.11 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note:If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation: .
1. Open the door.
Loading ...
Loading ...
Loading ...