Loading ...
Loading ...
Loading ...
B !nsert the key into the power switch.
Inserting the key will
not turn on the dis- (_
plays. The displays will
turn on when the
ON/RESET button is
pressed or when the
walking belt isstarted.
Note: If you just
installed batteries, the displays will already be on.
B Reset the speed control.
Slide the speed control
down to the RESET
position. Note: Each
time the walking belt
is stopped, the speed
control must be
moved to the RESET
position before the
walking belt can be
restarted.
1_1 Start the walking belt.
After you have moved the speed control to the
RESET position, slowlyslide it upward until the
walking belt begins to move at slow speed.
Carefully step onto the walking belt and begin ex-
ercising. Change the speed ofthe walking belt as
desired by sliding the speed control,
To stop the walking belt, step onto the foot roils
and slide the speed controlto the RESET position.
To change the incline of
the treadmill, press the
top or bottom of the in-
cline control until the
desired incline level is
reached.
B Adjust the incline of the treadmill as desired.
B Monitor your progress with the two displays.
TIME/DISTANCE dis-
play--This display
shows the elapsed time
and the distance that
you have walked or
run, in miles. Every
seven seconds, the dis-
Arrow
° sl l
TIME / DISTANCE
play will change from one number tothe other.
Arrows in the display will indicate which number is
currently shown.
CALS/FAT CALS/
SPEED display--This
display shows the ap-
proximate numbers of
calories and fat calories
you have burned. (See
FAT BURNING on
Arrow\
CALS / F_..ALS / SPEED
page 14.) In addition, the display shows the speed
of the walking belt, in miles per hour. Every seven
seconds, the display will change from one number
to the other. Arrows in the display will indicate
which number is currently shown.
To reset the displays at
any time, press the
ON/RESET button.
I
B When you are finished exercising, stop the
walking belt and remove the key.
Step onto the foot rails, stop the walking belt and
remove the key from the console. The displays will
turn off about five minutes after the key is removed.
Note: Any time that the walkin_l belt is stopped
and the ON/RESET button is not pressed for
five minutes, the displays will, automatically
turn off in order to conserve the batteries.
g
Loading ...
Loading ...
Loading ...