Loading ...
Loading ...
Loading ...
4 Preparation
17
T
Press the ‘Espresso’ button to start preparation�
T
Turn the grinder adjustment switch to the desired position
while the grinder is running�
The preset amount of water flows into the cup�
T
Close the filler funnel cover�
Press a product button on the start screen for about two seconds
to view the list of settings�
Permanent settings in programming mode always follow the same
model�
Example:Proceed as follows to change the coffee strength for one
coffee�
T
Press the ‘Coffee’ button for about two seconds.
T
Press the ‘Product settings’ button�
E Press the buttons on the left and right of ö ä ä to change
the product settings ‘Volume’ and ‘Temperature’�
T
Press the 0 or 9 button to change the setting for the coffee
strength�
T
Press the ‘Save’ button�
T
Press the R button to return to the start screen�
Adjusting the product
settings
5 Daily operation
T
Place a receptacle under the coffee spout and the fine foam
frother�
T
Press the On/Off button Q�
E When the machine is switched off, the system is only rinsed
if a speciality coffee has been prepared�
E If milk has been prepared before switching off, you will be
prompted to carry out milk system cleaning (‘Clean the milk
system’)� After 30 seconds the switch-off process continues
automatically�
If milk has been prepared but you have not started milk system
cleaning, you will first need to rinse the milk system (‘Rinse the
milk system’/ ‘Open switch’)�
Switching the machine on
and off
Loading ...
Loading ...
Loading ...