Loading ...
Loading ...
Loading ...
To install the suspension ring
1. Install the suspension ring to the shaft between the
rear handle and the loop handle.
2. Adjust the ring to make the product balanced and
easy to use.
3. Attach the harness to the suspension ring. Use the
harness when you operate the product.
To assemble the cutting attachment
guard and trimmer head
1. Attach the correct cutting attachment guard (A) for
the trimmer head. Refer to
Accessories on page 23
.
2. Put the cutting attachment guard onto the fitting on
the shaft.
3. Attach with the bolt (L).
A
A
B
C
4. Install the drive disc (B) on the output shaft.
5. Turn the output shaft until one of the holes in the
drive disc aligns with the related hole in the gear
housing.
6. Put the locking pin (C) in the hole to lock the shaft.
7. Turn the trimmer head /plastic blades (H) in the
opposite direction from which the trimmer head/
plastic blades rotates.
H
H
To disassemble the cutting attachment
guard and trimmer head
1. Turn the trimmer head /plastic blades (H) in the
direction from which the trimmer head/plastic blades
rotates.
H
H
2. Pull the locking pin (C) out from the hole to unlock
the shaft.
3. Remove the drive disc (B) on the output shaft.
4. Loosen the bolt(L) from the cutting attachment
guard-fitting on the shaft.
A
A
B
C
5. Remove the cutting attachment guard (A).
1927 - 001 - 10.06.2022
11
Loading ...
Loading ...
Loading ...