Loading ...
Loading ...
Loading ...
7
7
8
■ Connect the dishwasher to water and
power following the instruction booklet.
■ You should secure the dishwasher into
the housing unit. It is possible to do this
in the following ways:
- THROUGH THE ADJOINING
HOUSING UNIT with the supplied
16 mm long screws "B" (as indicated
in the figure 5).
- TO THE WORKTOP (if possible) with
the supplied 30 mm long screws "C"
(as indicated in the figure 5a).
Wooden panel installation
This dishwasher model is equipped with an
auto-balancing system in the door and
comes ready to mount a wooden panel of
the following size:
Width 596,5 mm max
Height from 645 to 720 mm max
Thickness from 18 to 22 mm max
This allows the use of a regular wing taken
from a drawer furniture weighing from 3 to
8 kg; for coverings weighing more, ask for
information to the Assistance Service.
N.B.:
If you wish to fit a wooden panel with
false drawer, ask for special kit to the
Assistance Service.
Drilling arrangements
■ Drill 12 mm deep holes in the panel
using a 2 mm diameter drill according to
the measures indicated in the figure 6.
■ Fasten the two supplied frames with 4 of
the 4 x 16 mm diameter screws, setting
them at the center of the eyelets (fig. 7).
■ Hang the panel on the dishwasher door
and align it by adjusting the frames with
the eyelets.
■ Fix the frames with the other 6 screws
4x16 mm in the specif holes (fig. 7).
■ Fasten the panel to the dishwasher door
with the screws 3.5 x 13 mm (fig. 8).
720 max.
645 min.
350 178
596,5 max.
=
=
572
6
5
5a
Loading ...
Loading ...
Loading ...