Loading ...
Loading ...
Loading ...
8
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-
907-8669).
STEP 2:
Remove Screw (No. 55) and Curved
Washer (No. 56) from the Tension Control
Knob (No. 54) using Spanner (No. C).
Insert Tension Control Wire (No. 54a) into
Handlebar Post (No. 42) and pull it out
from the bottom.
Attach the Tension Control Knob (No. 54)
to Handlebar Post (No. 42) using 1 Screw
(No. 55) and 1 Curved Washer (No. 56)
that were removed. Tighten and secure with
Spanner (No. C).
Note: Please make sure the Tension
Control Knob (No. 54) is at the lowest
resistance level (level 1, all the way to the
left) before you connect the Tension
Control Wire (No. 54a).
Connect the Trunk Wire (No. 53) with the
link wire of Sensor (No. 70) and connect
Tension Control Wire (No. 54a) with
Tension Wire (No. 60). Then, insert
Tension Control Wire (No. 54a) into the
slot on metal bracket of Tension Wire (No.
60). Make sure the metal fitting on Tension
Control Wire (No. 54a) is secured into the
metal bracket.
Attach Handlebar Post (No. 42) to the
Main Frame (No. 59) using 3 Bolts (No.
41), 2 Bolts (No. 40), 3 Spring Washers
(No. 30), 2 Nylon Nuts (No. 23) and 7
Curved Washers (No. 34). Tighten and
secure with Allen Wrench (No. A) and
Spanner (No. C)
Loading ...
Loading ...
Loading ...