Loading ...
Loading ...
Loading ...
en-us
16
Rectifying minor faults yourself
Before you call customer service:
Check whether you can eliminate the fault yourself based on the following information.
Otherwise, you may be charged for a service repair as it would not be covered by the warranty.
Fault Possible cause Remedial action
Temperature differs greatly
from the set value.
In some cases it is adequate to switch off
the appliance for 5 minutes.
If the temperature is too high wait a few hours
and check whether the temperature has
approached the set value.
If the temperature is too low check
the temperature again the next day.
The light does not work. Light switch is jammed. Check whether the light switch can move.
The light is defective. (See chapter “Light”.)
Controls have reduced lumi-
nosity.
When the appliance is not used for
some time, the display on the fascia
switches to energy saving mode.
As soon as the appliance is again used, e.g. the
door is opened, the display switches back to nor-
mal illumination.
Displays do not illuminate. Power failure;
the fuse has been switched off;
the power cord plug has not been
inserted properly.
Connect power cord plug. Check whether
the power is on, check the fuses.
The temperature in
the freezer compartment is
too warm.
Appliance opened frequently. Do not open the appliance unnecessarily.
The ventilation openings have been
covered.
Remove obstacles.
Large quantities of fresh food are
being frozen.
Do not exceed max. freezing capacity.
Loading ...
Loading ...
Loading ...