Loading ...
Loading ...
Loading ...
voice/data
wires
rail assembly
side cover
jacks
rail
Step #8: route voice and/or data wires
Skip this step if voice/data wires will not be used with
the unit.
• If routing through the base of an end post, remove the
plastic cover at the base of the post.
• Route the wires up through the post and out the
slotted opening above the rail.
• Route the wires across the top of the rail
assembly and down through the center opening.
• The wires may be routed in other appropriate
ways depending on installation type and installer
preference, as long as the voice/data jacks exit
the center of the rail assembly, as shown.
Step #9: reinstall rail assembly side cover(s)
•
• Pull the jacks out through the center hole in the side cover
before securing the cover in place.
Loading ...
Loading ...
Loading ...