Loading ...
Loading ...
3
WARNING
1. Read and understand the owner’s manual before assembly and operation.
2. Do not load scissor lift beyond its rated capacity.
3. Do not allow people to sit or ride on scissor lift.
4. Secure load before raising or moving scissor lift.
5. Do not transport loads in the raised position.
6. Use only on smooth finished floors.
7. Pull release lever slowly to allow load to descend in a controlled manner.
8. Keep hands and feet clear of table when lowering load.
9. Failure to comply with the above warnings may result in personal injury and/or property damage.
Specifications: DSLT-770
Stock Number.......................................................................................................................................140778
Capacity (lbs.) ........................................................................................................................................... 770
Table Size L x W (in.)...............................................................................................................35-5/8 x 20-1/8
Maximum Height (in.)............................................................................................................................51-1/8
Minimum Height (in.)........................................................................................................................... 13-9/16
Strokes to Reach Max. Height ...................................................................................................................~21
Overall Size L x W x H (in.)........................................................................................45-3/4 x 20-1/8 x 37-1/4
Net Weight (lbs.)........................................................................................................................................226
Shipping Weight (lbs.)............................................................................................................................... 235
Assembly
1. Attach the handle (A, Fig. 1) to the frame
using two hex cap bolts, two lock washers,
two flat washers. Tighten with a 19mm
wrench.
Note: The two rear casters can be locked
so they do not rotate. Press foot lever (B,
Fig. 1).
Loading ...
Loading ...
Loading ...