Loading ...
Loading ...
Loading ...
Installation Preparation
PARTS SUPPLIED:
Remove the hardware accessory bag and other parts
fl'om inside or taped to the outside of the dishwasher.
Check contents against illustrations to ii'Jsure that all
parts are included.
[] 2-piece toekick
[] 6 screws (see illustration)
[] 2 leveling legs
[] Junction boxcover
Junction
BoxCover
with screws
2 Leveling Legs
Screws A Screws B
(2)Countertop (2)Cabinet
Mounting Mounting
Screws Screws
Screws C
(2)Color
Matched
Toekick
Screws
e_
2-PieceToekickwith
SoundInsulation
PREPARE DISHWASHER ENCLOSURE
ThisWallArea
mustbeFree/
34"to35" PipesorWires
Underside 1
ofCountertop
toFloor
24"Max
• The rough cabinet opening Inust be at lea.'t 24 deep,
_35 "
2. -,/8 rain. to 24" wide. The height should be 34" rain.
add _"
_)r) Ill}IX,
Note: ADA installation, beneath 34"high countertops may be accom-
plished byremoving front leveling legs. Drain hose,water and
electrical must be routed through the cutout onthe back of the
dishwasher.
• The dishwasher must be installed so that drain hose is
no more than 10 feet in length for proper drainage.
• The dishwasher inust be flfllv enclosed on the top, sides
and back, but should not support any part of the
eI/clostlI'e.
• The floor inside the opening must be even and level
with the finished floor of the kitchen, If the kitchen
floor is tile, it may be
higher than the floor of
the installation cutout,
Pieces of wood may be
placed into the cutout
floor to make it level or
higher than the room
floor, This will alh)w easy
removal fi)r any flmn'e
service,
CornerInstallation
• When installing into a
corner, allow 2"rain.
clearance between
dishwasher and adjacent
cabinet or wall.
• Allow 24-1/2"min. clearance
from the front ofthe
dishwasher for door
opening.
J Countertop
Dishwasher
, _/2"
/_ Clearancefor Door
/Opening 2"Minimum
5
Loading ...
Loading ...
Loading ...