Loading ...
Loading ...
Loading ...
• You can delete a data value displayed using and by pressing
(CL). Deleting a data value causes all values following it to be
shifted up.
• Data values you register are normally stored in calculator memory. The
message "Data Full" appears and you will not be able to input any more
data if there is no memory left for data storage. If this happens, press
the key to display the screen shown below.
Press to exit data input without registering the value you just
input.
Press if you want to register the value you just input, without
saving it in memory
. If you do this, however, you will not be able to
display or edit any of the data you have input.
• To delete data you have just input, press
(CL).
• After inputting statistical data in the SD Mode or REG Mode, you will be
unable to display or edit individual data items any longer after perform
either the following operations.
Changing to another mode
Changing the regression type (Lin, Log, Exp, Pwr
, Inv, Quad)
Regression Calculations (REG) (fx-82MS/fx-85MS/
fx-300MS/fx-350MS only)
Use the
key to enter the REG Mode when you want to perform
statistical calculations using regression.
(REG)
• In the SD Mode and REG Mode, the key operates as the key.
• Entering the REG Mode displays screens like the ones shown below.
• Press the number key ( , , or ) that corresponds to the type of
regression you want to use.
(Lin) : Linear regression
(Log) : Logarithmic regression
(Exp) : Exponential regression
36
Loading ...
Loading ...
Loading ...