Pioneer WYS012GMFI20RL-16 12,000 BTU 21.4 SEER2 Ductless Mini-Split Inverter+ Air Conditioner Heat Pump System Full Set 230V

User Manual - Page 13

For WYS012GMFI20RL-16.

PDF File Manual, 20 pages, Read Online | Download pdf file

WYS012GMFI20RL-16 photo
Loading ...
Loading ...
Loading ...
3
Page 13
CAUTION
Before changing or cleaning the filter,
turn off the unit and disconnect its power
supply.
When removing filter, do not touch the metal
parts in the unit. The sharp metal edges can
cause cuts.
Do not use water to clean the inside of the
indoor unit. This can damage the insulation
and cause electrical shock.
Do not expose filters to direct sunlight when
drying. This can shrink or deform the filter.
Air Filter Reminders (Optional)
Air Filter Cleaning Reminder
After 240 hours of use, the display panel on
the indoor unit will flash “CL.” This is a reminder
to clean your filter. After 15 seconds, the unit will
revert to its previous display.
To reset the reminder, press the LED button
on your remote control 4 times, or press the
MANUAL CONTROL button 3 times. If you do not
reset the reminder, the “CL” indicator will flash
again when you restart the unit.
Air Filter Replacement Reminder
After 2,880 hours of use, the display panel on
the indoor unit will flash “nF.” This is a reminder
to replace your filter. After 15 seconds, the unit
will revert to its previous display.
To reset the reminder, press the LED button
on your remote control 4 times, or press the
MANUAL CONTROL button 3 times. If you do not
reset the reminder, the “nF” indicator will flash
again after restarting the unit.
CAUTION
Any maintenance and cleaning of outdoor
unit should be performed by an authorized
dealer or licensed service provider.
Any unit repairs should be performed
by authorized dealer or licensed service
provider.
Maintenance –
Long Periods of Non-Use
If you plan not to use your air conditioner for an
extended period of time, do the following:
Clean all filters
Turn on FAN function until
unit dries out completely
Turn off the unit and
the power breaker
Remove batteries
from the remote control
Maintenance –
Pre-Season Inspection
After long periods of non-use, or before periods
of frequent use, do the following:
Check for damaged wires Clean all filters
Check for leaks Replace batteries
Make sure nothing is blocking any air inlets and outlets
Care and
Maintenance
Loading ...
Loading ...
Loading ...