Ancona AN-22144RD User Manual and Installation Instructions

Loading ...

— 13 —

STEP 10

Connect Ductwork

•Attach ductwork to damper. Secure the ductwork with duct tape to

make sure joints are secure and air- tight.

•Do not install the duct tape too tightly as this may prevent the

damperapsfromopeningwhichwilloverworkthemotorandcause

improper functioning of the unit.

•Fasten all connections with sheet metal screws and tape all joints

with certied aluminum or foil tape. Use caulking to seal exterior

wall or roof opening around the cap.

•For additional support, use pre-drilled holes and mounting screws to attach side and top of the range hood. (See Figure

#6 and #7).

Figure #8

Figure #6 Figure #7

STEP 11

Connect to AC

•ConnectACplugintoagroundedACoutlethaving120V,60Hz.Placetheoutletatamaximumdistanceof33-1/2in.

(851 mm) from where the cord exits on the hood.

•SEE IMPORTANT INSTRUCTIONS ON NEXT PAGE.

3-Pronged Plug

Ground Plug

3-Prong Receptacle

Installation

Loading ...

Ancona AN-22144RD 2-piece Kitchen Package with 48" 8-burner with Griddle Gas Range and Matte Red Door and 600 CFM Built-In Range Hood