Loading ...
Loading ...
Loading ...
Continued
413
uuWhen DrivinguStarting the Engine
Driving
1. Depress and hold the brake pedal, then press the ENGINE START/STOP button.
1. Keeping your right foot on the brake pedal, put the transmission into
(D. Select
(R when reversing.
2. With the parking brake applied, release the brake pedal and gently depress the
accelerator pedal.
u Make sure the parking brake and brake system indicator (red) goes off.
2 Parking Brake P. 518
■
Hill start assist system
Hill start assist keeps the brake engaged briefly to help prevent the vehicle from
rolling on inclines as you move your foot from the brake pedal to the accelerator.
Put the transmission into
(D, (S, or (L when facing uphill, or (R when facing
downhill, then release the brake pedal.
■
Starting to Drive
1Starting to Drive
The engine stops when the transmission is taken out
of
(P before the ENGINE START/STOP button is
pressed. Follow step 1 when starting to drive.
You can also release the parking brake by pressing
the electric parking brake switch while depressing the
brake pedal.
When facing downhill, you can start your vehicle
more smoothly by manually releasing it with the
electric parking brake switch than by releasing it with
the accelerator pedal.
When the engine was started using the button
on the keyless remote
*
When the engine was started using the button on the keyless remote
*
When the engine was started in any case
1Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very steep or slippery slope, and
will not operate on small inclines.
Hill start assist will operate even when VSA® is
switched off.
Hill start assist is not a replacement for the parking
brake.
* Not available on all models
24 HR-V HDMC PET-313V06110.book 413 ページ ２０２３年５月１９日 金曜日 午前１１時３１分
Loading ...
Loading ...
Loading ...