Loading ...
Loading ...
Loading ...
(oontinuedJ
, Make sure end of drain hose is correctly inserted and secured to drain facility.
• Avoid extended soaking - Soak for 30 minutes or!es s.
, Av0id 0ver!oading,
Fills with the Wrong Temperature Water
• Turn both faucets on fully.
• Make sure temperature selection is correct.
• Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated correctly.
Flush water line before filling washer.
• Check the water heater. It should be set to deliver a mininlum 120 ° F (49 ° C) hot water at the tap. Also check water
heater capacity and recovery rate.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
Loading ...
Loading ...
Loading ...