Loading ...
Loading ...
Loading ...
INSTALLATION
Electrical Connection
• The unit is designed to function under the recommended power settings
mentioned in the rating label at the back of the washing machine.
• The power cord must be plugged into a grounded 3-pin outlet.
• If the power cord is damaged, it should be replaced by the manufacturer/
distributor or a certied technician.
Connection of Water Inlet Hose
• Attach the water inlet hose to the water inlet (Please refer to the Parts
Identication on page). Caution: Please use water BELOW 120°F.
• The drain hose should be placed so that the water can drain down without any
obstruction.
OPERATION INSTRUCTION
Preparing the Wash
• The machine should be placed on a at surface.
• Separate the laundry into dierent groups like: white clothes, color clothes,
delicate clothes, lint-free and etc. Wash the laundry according to the washing
guide.
• Clothes with worn patches or tears should be mended rst.
Empty all pockets and close all fasteners.
Prior to Wash
• Remove the plastic spin mat from the spin tub.
• Check if wash timer knob is set to position “0” and the selector switch is set to
“Wash”.
• Ensure that drain hose is placed properly to allow draining.
• Insert the power cord into a grounded 3-pin outlet.
To Wash
• Place the wash load and detergent in the wash tub.
• Set the selector switch to “Wash” mode.
• Fill the washing machine with water as recommended in the “Laundry Guide.”
• Set the wash timer to the wash period recommended in the laundry guide.
Your machine will now wash for the time selected. When the wash period
expires, set the selector switch to “Drain” position to discharge the water.
www.PyleUSA.com
4
Loading ...
Loading ...
Loading ...