Home
Bookmarks
Home
Bosch
Bosch DIB091K50B/03 User Manual
Bosch DIB091K50B/03 Serie 8 Island chimney hood
User Manual
For DIB091K50B/03.
PDF File Manual
,
16 pages
,
Read Online
|
Download pdf file
[en] Instructions for installation and use
Extractor hood
Table of contents
[en] Instructions for installation and use
Instruction manual
8 Intended use
Intended use
( Important safety information
Important safety information
: Warning
Danger of suffocation!
: Warning
Danger of death!
: Warning
Risk of fire!
: Warning
Risk of burns!
: Warning
Risk of injury!
: Warning
Risk of electric shock!
Causes of damage
Caution!
7 Environmental protection
Environmental protection
Environmentally-friendly disposal
à Operating modes
Operating modes
Exhaust air mode
Note:
Circulating-air mode
Notes
1 Operating the appliance
Operating the appliance
Note:
Control panel model 1
Explanation
Setting the fan
Intensive setting
Fan run-on time
Lighting
Saturation display
Audible signal
Control panel model 2
Explanation
Setting the fan
Intensive setting
Automatic mode
Sensor control
1. Press and hold the > symbol for four seconds when the fan is switched off. The setting is displayed.
2. The sensor control setting can be changed by touching symbol 1, 2, 3, or the C or D symbol.
3. To confirm the entries, press and hold the > symbol for four seconds.
Fan run-on time
Lighting
Saturation display
Audible signal
2 Cleaning and maintenance
Cleaning and maintenance
: Warning
Risk of burns!
: Warning
Risk of electric shock!
: Warning
Risk of electric shock!
: Warning
Risk of injury!
Cleaning agents
Area
Cleaning agents
Cleaning the metal mesh grease filters
: Warning
Risk of fire!
Notes
In the dishwasher:
Note:
By hand:
Note:
Removing metal grease filter
1. Open the lock and fold down the metal grease filter. While doing this, place the other hand under the metal grease filter.
2. Take the metal grease filter out of the holder.
Notes
3. Clean the metal grease filter.
Installing the metal mesh grease filter
1. Insert the metal mesh grease filter.
2. Fold the metal mesh grease filter upwards, locking it in place.
3 Trouble shooting
Trouble shooting
: Warning
Risk of electric shock!
Malfunction table
Problem
Possible cause
Solution
Replacing bulbs
: Warning
Risk of electric shock!
Replacing halogen bulbs
Note:
1. Carefully remove the bulb ring using a suitable tool.
2. Pull out the bulb and replace it with a bulb of the same type.
3. Insert the bulb cover.
4. Insert the mains plug or switch on the fuse again.
LED lights
: Warning
Risk of injury!
4 Customer service
Customer service
To book an engineer visit and product advice
Accessories for circulating-air mode
Notes
Installation instructions
( Important safety information
Important safety information
: Warning
Risk of death!
: Warning
Danger of death!
: Warning
Danger of death!
: Warning
Risk of fire!
: Warning
Risk of injury!
: Warning
Risk of electric shock!
: Warning
Risk of electric shock!
: Warning
Danger of suffocation!
K General information
General information
Exhaust air mode
: Warning
Risk of death!
Exhaust duct
Note:
Preparing the ceiling
Electrical connection
: Warning
Risk of electric shock!
: Warning
Risk of electric shock!
5 Installation
Installation
Fitting the upper support frame
1. Before fitting, determine the total height of the support frame and mark the screw holes.
Note:
2. On the ceiling, mark the centre point of the appliance.
3. Using the enclosed template, mark the positions for the screws on the ceiling.
4. Drill four 8 mm diameter holes to a depth of 80 mm for the fasteners and press in the wall plugs flush with the ceiling.
5. Fasten the upper part of the support frame to the ceiling with 4 screws.
Note:
Fitting the lower support frame
Notes
Fitting the appliance
1. Hook the appliance from below into the support frame.
Note:
2. Fasten the appliance to the support frame using 2 securing screws.
3. Hook in the retaining clip and screw tight.
Connecting the pipes
Note:
Exhaust-air pipe à 120 mm
1. Attach the reducing connector directly to the air-pipe connector.
2. Attach the exhaust air pipe to the reducing connector.
3. Seal both joints appropriately.
Attaching the flue duct
: Warning
Risk of injury!
1. Separate the flue ducts.
2. Remove the protective foil from both sides.
3. Place both parts of the upper flue on the appliance and push together.
Note:
4. Push up the upper flue part and secure with 2 screws.
5. Insert both lower parts of the flue and push together.
Page 1/16
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Contents
Table of Contents
Search
Previous
Next
Troubleshooting
Bookmarks
[en]
Instructions for installation
and use
Extractor hood
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 42789910_dib091k50-01.pdf
File size: 2.22 MB
File Language: English
Pages: 16
Author: Bosch
File created: 2014-12-09
Published: 2023-10-28
Updated: 2023-10-28
Download File
Other documents for Bosch DIB091K50B/03
The following documents are available:
User Manual
User Manual - (English)
Read Online
|
Download pdf
Photos
Photos:
View Photos
Specifications
Brand:
Bosch
Model: DIB091K50B/03
Category:
Hoods
See other models:
SGE0905/04
MKM6008(00)
HXR390D50/05
PEE689CA1/01
GCM15VW20N/03
Related Products
Futuro Futuro IS36SPIRIT
Futuro Futuro IS27MURNEWYORK
Futuro Futuro IS34MURNEWYORK
Futuro Futuro IS48LINEARE
Futuro Futuro IS16LOFT
Bosch DIB091K50B/01
Bosch DIB091K50/03
Bosch DIA098E50B/03
Bosch DIB091E59/02
Bosch DIB091E50/03
Bosch DIB091E50/01
Bosch DIB091U51/02
Bosch DIB091E51/03
Bosch DIA098E50B/02
Bosch DIA098E50B/01
Table of Contents
×
[en] Instructions for installation and use
1
Extractor hood
1
Table of contents
2
[en] Instructions for installation and use
2
Instruction manual
2
8 Intended use
2
Intended use
2
( Important safety information
2
Important safety information
2
: Warning
2
Danger of suffocation!
2
: Warning
2
Danger of death!
2
: Warning
3
Risk of fire!
3
: Warning
3
Risk of burns!
3
: Warning
3
Risk of injury!
3
: Warning
4
Risk of electric shock!
4
Causes of damage
4
Caution!
4
7 Environmental protection
4
Environmental protection
4
Environmentally-friendly disposal
4
à Operating modes
4
Operating modes
4
Exhaust air mode
4
Note:
4
Circulating-air mode
4
Notes
4
1 Operating the appliance
5
Operating the appliance
5
Note:
5
Control panel model 1
5
Explanation
5
Setting the fan
5
Intensive setting
5
Fan run-on time
5
Lighting
5
Saturation display
5
Audible signal
5
Control panel model 2
6
Explanation
6
Setting the fan
6
Intensive setting
6
Automatic mode
6
Sensor control
6
1. Press and hold the > symbol for four seconds when the fan is switched off. The setting is displayed.
6
2. The sensor control setting can be changed by touching symbol 1, 2, 3, or the C or D symbol.
6
3. To confirm the entries, press and hold the > symbol for four seconds.
6
Fan run-on time
6
Lighting
6
Saturation display
7
Audible signal
7
2 Cleaning and maintenance
7
Cleaning and maintenance
7
: Warning
7
Risk of burns!
7
: Warning
7
Risk of electric shock!
7
: Warning
7
Risk of electric shock!
7
: Warning
7
Risk of injury!
7
Cleaning agents
7
Area
7
Cleaning agents
7
Cleaning the metal mesh grease filters
8
: Warning
8
Risk of fire!
8
Notes
8
In the dishwasher:
8
Note:
8
By hand:
8
Note:
8
Removing metal grease filter
8
1. Open the lock and fold down the metal grease filter. While doing this, place the other hand under the metal grease filter.
8
2. Take the metal grease filter out of the holder.
8
Notes
8
3. Clean the metal grease filter.
8
Installing the metal mesh grease filter
8
1. Insert the metal mesh grease filter.
8
2. Fold the metal mesh grease filter upwards, locking it in place.
8
3 Trouble shooting
9
Trouble shooting
9
: Warning
9
Risk of electric shock!
9
Malfunction table
9
Problem
9
Possible cause
9
Solution
9
Replacing bulbs
9
: Warning
9
Risk of electric shock!
9
Replacing halogen bulbs
9
Note:
9
1. Carefully remove the bulb ring using a suitable tool.
9
2. Pull out the bulb and replace it with a bulb of the same type.
9
3. Insert the bulb cover.
9
4. Insert the mains plug or switch on the fuse again.
9
LED lights
9
: Warning
9
Risk of injury!
9
4 Customer service
10
Customer service
10
To book an engineer visit and product advice
10
Accessories for circulating-air mode
10
Notes
10
Installation instructions
11
( Important safety information
11
Important safety information
11
: Warning
11
Risk of death!
11
: Warning
11
Danger of death!
11
: Warning
12
Danger of death!
12
: Warning
12
Risk of fire!
12
: Warning
12
Risk of injury!
12
: Warning
12
Risk of electric shock!
12
: Warning
12
Risk of electric shock!
12
: Warning
12
Danger of suffocation!
12
K General information
13
General information
13
Exhaust air mode
13
: Warning
13
Risk of death!
13
Exhaust duct
13
Note:
13
Preparing the ceiling
13
Electrical connection
13
: Warning
13
Risk of electric shock!
13
: Warning
13
Risk of electric shock!
13
5 Installation
14
Installation
14
Fitting the upper support frame
14
1. Before fitting, determine the total height of the support frame and mark the screw holes.
14
Note:
14
2. On the ceiling, mark the centre point of the appliance.
14
3. Using the enclosed template, mark the positions for the screws on the ceiling.
14
4. Drill four 8 mm diameter holes to a depth of 80 mm for the fasteners and press in the wall plugs flush with the ceiling.
14
5. Fasten the upper part of the support frame to the ceiling with 4 screws.
14
Note:
14
Fitting the lower support frame
14
Notes
14
Fitting the appliance
15
1. Hook the appliance from below into the support frame.
15
Note:
15
2. Fasten the appliance to the support frame using 2 securing screws.
15
3. Hook in the retaining clip and screw tight.
15
Connecting the pipes
15
Note:
15
Exhaust-air pipe à 120 mm
15
1. Attach the reducing connector directly to the air-pipe connector.
15
2. Attach the exhaust air pipe to the reducing connector.
15
3. Seal both joints appropriately.
15
Attaching the flue duct
15
: Warning
15
Risk of injury!
15
1. Separate the flue ducts.
15
2. Remove the protective foil from both sides.
15
3. Place both parts of the upper flue on the appliance and push together.
15
Note:
15
4. Push up the upper flue part and secure with 2 screws.
15
5. Insert both lower parts of the flue and push together.
15
Search:
×
Search
