Loading ...
Loading ...
Loading ...
Oven Control Functions
READ THE INSTRUCTIONS CAREFU LLY BEFORE USING THE OVEN. Forsatisfactory use ofyour oven, become familiar with
the various pad functions of the oven as described below.
CLOCK SET COOK TIME
PAD Used PAD-- Used to
to set the enter the length of
time of day. the baking time.
\ \
OVEN INTERIOR
LIGHT PAD Used to
[urn oven menor light
ON or OFF. _. o \ e
SELECT SELF-CLEAN
® •
PAD used _o selec_
me Self-Cleaning
cycte. A 2. 3 or 4 qour /.
Self-Clean _lme may be /
/-
./
selected /
/
/ /
/" /
/-
TIMER SET/OFF PAD DELAY START
Used to set or cancel the PAD Used to set
minute timer, The minute the desired start
timer does not start or stop time for baking &
cooking. Also, Self-Clean. May be
TIMER SET/OFF pad is used with COOK
used to set the Continuous TIME to program a
Bake feature, delayed bake cycle.
UP and DOWN ARROW PADS-- Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time of
day, clean time and minute timer.
BAKE PAD--Used
to select the bake
function.
FEATURE INDICATOR
LIGHTS-- These light to
show which feature is in
use.
O e BROIL PAD-- Used to
select the variable broil
_t_ _:_ function.
® ® 0_ o
o
!l
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature, The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature, The "BOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks,
WARM & HOLD PAD--
Used to set the Warm &
Hold feature.
STOP/CLEAR PAD--
Used to clear any
function previously
entered except the time
of day and minute timer,
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate oven
door lockout setting.
*Note: The OVEN indicator light on the eiectrohio display will turn ONand OFF when Using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature, When the
preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold @. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press and hold @ again for 7 seconds until the control beeps
once.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press B,o_.... appears in the display.
2. Press and hold the A until "HI" appears in the display.
3. Press and hold B,o,until °F or °C appears in the display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
10
Loading ...
Loading ...
Loading ...