Craftsman 24079653 edger

User Manual - Page 4

For 24079653.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
SAVE THIS MANUAL FOR FUTURE
REFERENCE
WARNING: When using this tool,
basic safety precautions should
always be followed to reduce the risk
of fire, electric shock, and personal
injury, including the following:
To reduce risk of injury:
* Before any use, be sure everyone
using this electric product reads
and understands all safety and
operation instructions contained in
this manual.
* Save these instructions and review
frequently prior to use.
* AVOID DANGEROUS
ENVIRONMENTS and weather
conditions when using this tool.
* DO NOT USE IN RAIN.
* KEEP CHILDREN AWAY-All
visitors should be kept at a safe
distance from work area.
" STORE IDLE UNIT INDOORS -
When not in use, the unit should be
stored indoors in a dry location - out
of reach of children.
* DON'T FORCE THE TOOL - It
will do the job better and with tess
likelihood of a risk of injury at the
rate for which it was designed.
* USE RIGHT TOOL - Do not use the
tool for any job except that for which
it is intended.
round-jacketed extension cords
approved for outdoor use.
* To reduce risk of electric shock, this
unit has a polarized plug (one blade
is wider than the other). This unit
will fit with a polarized plug only one
way. If the extension cord plug will
not completely fit on the units plug,
reverse the plug. If the extension
cord will still not fit, use an extension
cord with the proper polarized
connection. If the plug still does not
fit, contact a qualified electrician
to install the proper wall outlet. Do
not alter the unit's plug or extension
cord in any way.
* A nameplate on the unit will indicate
the voltage used. This information
is needed to determine the wire size
(AWG) of the extension cord you
should use. Never connect the unit
to an AC voltage that differs from
this voltage.
* WARNING: To reduce the risk of
electric shock, use the unit only
with an extension cord intended
for outdoor use, such as SW-
A, STW-A, STOW-A, SJW-A,
SJOW-A, SJTW-A, or SJTOW-A
cord types.
MINIMUM WIRE SIZE FOR
EXTENSION CORDS FOR 120 VOLT
APPLIANCES USING 0-12 AMPS
ELECTRICAL SAFETY
WARNINGS AND iNFORMATiON
= When servicing, use only identical
replacement parts.
* This tool is double-insulated - repair
or replace damaged cords.
* Since this tool is double-insulated,
a two wire extension cord (an
extension cord without a ground)
may be used. A three-wire
extension cord (an extension cord
with a ground) that uses a NEMA
type connector (parallel blade, U
ground) is recommended. Use only
Cord length 25 50 100 150
*Wire Size(AWG) 16 16 14 12
*The wire size (AWG) for 120-Volt
appliances using 12-16 amps is 14
AWG for 25 feet, 12 AWG for 50 feet,
and NOT RECOMMENDED for 100 or
150 feet.
GROUND FAULT CIRCUIT
INTERRUPTER (GFCI)
PROTECTION should be provided
on the circuits(s) or outlet(s) to be
used for the edger. Use receptacles
with built-in GFCI protection for an
4
Loading ...
Loading ...
Loading ...