Loading ...
Loading ...
Loading ...
10
BLOWER OPERATION
This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed.
1. Verify that the power cord is disconnected from the outlet. (g. 1)
2. Make sure the collection tank is empty before using as a blower.
3. Remove hose from the vacuum port.
4. Insert the larger end of the hose into the blower port on the backside of the power head. (g. 2)
5. Verify that the power switch is in the ‘O’ (OFF) position before plugging the power cord into the
outlet. (g. 3)
6. Before turning on the vac, rmly hold loose end of the hose. Turn the motor on by ipping the
switch to the ‘I’ ON position. (g. 4)
WARNING:
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN
CANADA, CSAZ94.3) BEFORE USING BLOWER.
WARNING:
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT
BE INHALED.
CAUTION:
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
2
3
4
2
1
Loading ...
Loading ...
Loading ...