Ancona AN1221 User Manual

Loading ...

— 8 —

STEP 1

Read the Safety Instructions

• It is very important to read the safety instructions on pages 4 and 5.

IMPORTANT: It is the installer’s responsibility to comply with installation clearances.

STEP 2

Unpack Range Hood and Prepare Tools

• Carefully unpack the range hood and parts. Make sure all parts are included as shown on page 6.

• DO NOT remove the protective lm covering the appliance until the installation is fully completed.

• Consult a qualied and trained installer or check local codes for makeup air requirement, if any.

STEP 3

Plan Desired Location

• Plan a desirable location that ts all requirements in the Safety and Installation sections of this manual. Plan where

and how the ductwork will be installed.

• A straight or short duct run will allow the unit to perform most efciently. Long duct runs, elbows and transitions

will reduce the performance of the unit. Each elbow is equivalent to 5 to 10 feet (1.5 m to 3 m) of straight run.

• If ductwork is already installed: ensure ductwork is free from debris.

STEP 4

Test Unit Functions

• Plug the unit in and test all of the functions before installing.

• Placetherangehoodonaat,stablesurface.Connecttherangehoodtoadesignatedstandardoutlet(120-Volt,60Hz)

and turn on the range hood. Verify all operations of the range hood by referring to

Range Hood Operations.

• Turn power On in control panel.

• Check all lights and fan operations.

WARNINGS:

• PleasemakesuretoreadALLsafetyinstructionsonpages4and5.

• Usetwoormorepeopletomoveandinstallrangehood.

• Failuretofollowtheseinstructionscanresultinseriousinjury.

Installation

Loading ...

Ancona AN1221 30 Inch Stainless Steel Ducted Standard Hood Under Cabinet Hood