Loading ...
Loading ...
Loading ...
- 9 -
5.2 Workflow:[Working time:36S]
Start work,the motor starts 3 gear work 6S,then switch to 9 gear
work 12 S,continuous cycle work after 2 times.
6. DIY
6.1 A、When the system is on standby,touch the corresponding DIY
function icon and + /- icon and switch icon are flashing, the default
gear is in three gear and 60 seconds,when touching the +/- icon is
added, one step in 5 seconds(change within 10-90S),press the cycle
change;after the time adjustment,touch the key to work;
B、Touch the DIY function to enter the gear adjustment again;the
corresponding icon and +/- icon and switch icon are flashing,when
touching the +/- icon changes from 1-9;touch the key
operation,working time is set in the last step;
6.2When working in the corresponding DIY state, the DIY and + / -
icon are always bright, and the gear position can be adjusted when
the + / - icon is touched;
7. PULSE(30S)
A
、
In the standby state,long press the "P"function, the buzzer prompt
1 sound, the corresponding icon is always bright,the motor starts to
work,
The working time is 30S;the motor works at 0.5S and then switches
to 9 gear;when the speed reaches the 9 gear, the motor stops
working immediately.
(Each long click point cleaning limit working time is 30 seconds, 30
seconds after automatically exit the work, need to long key again to
enter the work).
B
、
In standby mode "P" function, then press the key, enter the
intelligent working state, 30S; the motor first press 1 gear 0.5S,and
then switch to 9 gear; when the speed reaches 9 gear, always press
this speed;
Loading ...
Loading ...
Loading ...