Loading ...
Loading ...
Loading ...
6 Eureka Customer Service HELPLINE 1-800-282-2886
How to use your vaccum cleaner
Switching between carpet & hard floor
There is a switch located on the floor nozzle that can be pressed with
your foot to switch between floor modes. The symbols shown below
correspond to the type of floor the setting is for.
Position 1: Bristles extended for hard floor
Position 2: Bristles retracted for carpet
CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the
hose/attachments or removing and emptying the dust bag.
Operation
Turn on the machine:
Pull the power cord out of the vacuum cleaner and stop when you
see the yellow mark. Make sure the red mark is not visible or you
have pulled too far. Insert the plug of cord into the power socket
which conform to that on the label for power supply, and press the
On/Off switch pedal, the machine could start working.
Cord rewind：
When done cleaning, turn off the power, pull the plug
out of the electrical socket, and then push the rewind button until
the cord is completely retracted.
ON/Off button
Cord rewind
button
Loading ...
Loading ...
Loading ...