Loading ...
Loading ...
Loading ...
80
8 Additional
Information
How to Lock Your Lap and Shoulder Vehicle Seat Belt
Sliding Latch Plate and Switchable
Retractor
A latchplate that slides freely on the belt
webbing and cannot, by itself, hold the belt
snug around a car seat.
When installing the car seat, route the
vehicle seat belt through the proper belt
path and buckle it in. Slowly pull the
shoulder belt all the way out to switch
it to locking mode. Then, as you pull the
vehicle seat belt tight, feed all the slack
back into the retractor.
Grab the sides of the seat at the belt path
and slide the seat side-to-side and front-
to-back. The seat should not move more
than 1” (2.5 cm).
Note: With the vehicle seat belt in this locking mode, all the tension is upwards in
the shoulder belt. This may start to tilt your car seat sideways. If this happens, use a
locking clip instead of this switching the retractor. See Sliding Latch Plate and ELR
Retractor.
Loading ...
Loading ...
Loading ...