Loading ...
Loading ...
Loading ...
4
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there may be
accessory parts contained within the packaging material. Make sure to handle the Blade
attachment by its collar only.
WARNING: Blades are extremely sharp. Use extreme care when handling.
• Before your first use, wash the Travel Lid, Blend To Go-Blender Cup and Blade assembly
using warm soapy water. Rinse thoroughly and dry before assembling the blending jar.
• Do not rush while washing the Blade Assembly. The blades are extremely sharp and can
easily cause injury if not handled carefully.
Using Your Blend-To-Go Blender:
WARNING: Avoid contact with moving parts.
1. Place the Motor Base on a clean, flat surface.
2. Fill your clean Blend-To-Go Cup with your favorite ingredients, leaving at least a 1-inch rim
and do not fill past the Max line. This will allow the Blade Assembly to be inserted without
overfilling the Cup.
3. Place the Blade Assembly and tighten by turning clockwise until it completely secured.
4. Turn the bottle over and insert into the motor base until the slots are in place. (See image
above) Turn the Cup clockwise to lock it in place.
5. Connect Plug to the nearest electrical outlet. Pulse your beverage to the consistency of
your preference.
CAUTION: Pulse no longer than 1 minute straight. Allow motor to rest 3 minutes before
continuing. 1 minute can overheat the motor.
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This
is a result of the heating element chemical reaction. It quickly goes away.
6. When you have finished blending, disconnect the appliance from the outlet and turn the
blending cup counterclockwise to remove from the base.
7. Lift and position the cup right side up and carefully remove the Blade assembly and add
the Travel Lid.
Cleaning Your Blend-To-Go Blender:
WARNING: Always unplug the product and allow it to cool before cleaning or storing it.
NOTICE: Never immerse the motor base, plug or cord in water or any other liquid.
• It is recommended to rinse parts immediately after use to make cleaning easier.
• Handle blades with extreme caution. You may use a small nylon bristle brush to remove
food that has adhered to the Blade assembly.
• Travel Lid, To-Go Cup and Blade assembly are dishwasher safe. Or can be washed using
warm soapy water. Do not use abrasive cleaners or pads.
• Rinse thoroughly and dry. Reassemble and store.
• The motor base may be wiped with a damp cloth.
NOTE: NEVER IMMERSE THE BASE IN ANY WATER OR LIQUID
Loading ...
Loading ...
Loading ...