Loading ...
Loading ...
Loading ...
11
3. The Web Interface
3.3.3 Control/Load Groups
The Load Groups page (Figure 3-10) is used to create and control groups of outlets on select devices that have two or more controllable loads.
Click the [+] button to create a new load group, configure it accordingly, then click the [Save] button to store it. Click the [x] to delete an existing
load group and click the [Save] button to remove it permanently.
Note: An individual load can only be a member of a single Load Group.
As on the Loads page, the loads in a Load Group can be turned On, Off, or set to Cycle as a group. Refer to the Loads page for additional
information on Load Group control. The state switch will change to blue and the switch position will be in the center if the loads in the group
are not all in the same state. Refer to Figure 3-11 to see two loads in the “Even Loads” group “Off” state and Figure 3-12 to see how this is
represented in the Load Groups page.
Figure 3-10: Load Groups Page
Figure 3-11: Loads in Mixed States
Loading ...
Loading ...
Loading ...