Loading ...
INTROUDCTION:
Thank you for purchasing PYLE series 1 U Rack Mount Power
Supply Conditioner, and congratulations on your choice. The
Power Supply Conditioners feature excellent surge protection for
all your systems， and they supply outlets for your
powering equipment. It not only protects anything plugged into
them from spike and surges, but also has a built-in AC noise
filter to rid the system of radio frequency and electromagnetic
interference. And this allows all your equipments to function
better and last longer.
SAFETY INFORMATION:
To obtain best results from our Power Supply Conditioner Unit,
please read the manual carefully before using.
WARINGS:
To reduce the risk of electrical shock, do not expose this equipment
to rain or moisture. Dangerous high voltage is present inside the
enclosure. Do not remove the covers. Refer servicing to qualified
personnel only.
CAUTION:
These equipments shall be connected a 20 Ampere rated
receptacle of the branch circuit. The total current drawn from
the receptacles of these equipments is 15 Amperes maximum,
and no individual receptacle shall draw more than 12 Ampere.
multiple
21
IMPORTANT SAFETY GUIDELINES:
*Please pay attention to the operating and
maintenance instruction in this manual.
*Read the instructions.
*Keep and follow all the instructions.
Heed all warnings.
*To prevent fire or electric shock, do not expose this equipment to
rain or moisture. Do not use this apparatus near water.
*Clean the unit with a damp cloth only, Do not use solvents or
abrasive cleaners. Never pour liquid on or into the unit.
*Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatuses (including amplifiers) that
produce heat.
*Do not defeat the safety purpose of the polarized or
grounding–type plug. A polarized plug has two blades with one
wider than the other. A grounding plug has two blades and round
grounding prong. The wide blade or third prong is provided for
your safety. If the provided plug does not fit your outlet, consult
an electrician for the placement of the obsolete outlet.
*Route the power cord and other cables so that they are not likely
to be walked on, tripped over, or stressed. Pay particular attention
to the condition of the cords and cables at the plugs, and the point
where the Power Supply Conditioners. To prevent risk of fire or
injury, damaged cords and cables should be replaced immediately.
*Unplug the unit during lightning storms or when unused for long
periods of time
*When wiring this unit and all other equipment used in connection to
this unit make sure that all of your equipment it turned OFF
close important
PCO850/ /PDBC50 PDBC70
Loading ...
Loading ...