Loading ...
Loading ...
Loading ...
off excess oil with a soft cloth. Periodically lubricate the
teeth of the blade to reduce blade friction.
To ensure long lasting performance of your clipper,
clean the blades and the surface of the unit regularly.
After each use
Make sure the appliance is switched off and unplugged
from the power outlet before cleaning.
Brush the accumulated hair residue from the blades and
the body of the clipper. The blades can be rinsed under
water if it is detached from the body of the unit. To
clean the unit, wipe with a damp cloth and wipe it with
a dry cloth immediately.
Do not rinse o submerge the clipper in water.
Apply a few drops of sewing machine oil onto the
blades. Wipe off excess oil.
Cleaning
1 Switch off the product and disconnect it from the wall
outlet.
2 Wipe the handle of the product with a dry cloth.
3 Remove any guide comb or attachment from the
product.
4 Blow off any hair residue that has accumulated in the
blade part of the hair clipper.
5 Blow off any hair residue that has accumulated on the
attachments and/or guards.
6 Clean the clipper with a soft brush, like the one that
comes with the product.
Caution
Clean the clipper with a soft brush, like the one that
comes with the product.
Do not rinse or submerge the clipper in water.
Do not use harsh or corrosive cleaners on the unit or its
blades.
Ensure the appliance is switched off and unplugged
from the outlet before cleaning.
Storage
Unplug the hair clipper and store the unit in a safe dry
place and keep it out of reach of children. Never wrap
the cord around the hair clipper as this will cause the
cord to wear in a quicker way. Handle the cord carefully
so that it can have a long life span and avoid jerking,
twisting or straining especially the plug connections.
Product Disposal
When this rechargeable hair clipper reaches the end of
its usable life, the batteries must be removed, recycled
or disposed of properly in accordance with local laws or
requirements of communities.
The following procedure should be followed for battery
removal:
The rechargeable battery must be removed from the
appliance before it is scrapped.
Disconnect the charging cable before removing the
battery.
Ensure that the battery is fully discharged. To do this,
operate the trimmer until it stops.
Remove the comb attachment
Remove the blade cartridge
Pry the decorative panel off the top housing to expose
the internal parts and printed circuit board.
Unscrew the screws on the big printed circuit board and
screws on the small printed circuit board.
Disconnect the battery from the circuit board.
The battery must be disposed of at an appropriate
official recycling/collection center.
Do not attempt to operate the trimmer once you have
detach it.
Warranty
1-YEAR WARRANTY
If your Glaker product fails to operate as expected
within one year from the date of original purchase or
from the date on the receipt, Glaker will, at our option,
repair it for you or replace it with a new one FREE OF
CHARGE.
Question? Contact us at:
EN
1 2 3 4 5 6 7 8
Loading ...
Loading ...
Loading ...