Ancona AN-1156 User Manual & Installation Instructions

Loading ...

— 20 —

Use and Care Information

Operations

• Read and understand all instructions and warnings in this manual before operating the appliance. Save these

instructions for future reference.

• Always leave safety grills and lters in place. Without these components, operating fans could catch on to hair, ngers

and loose clothing.

• NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into fans.

• NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch re. The risk of self

combustion is higher when the oil has been used several times.

• NEVERcookon“open”amesundertherangehood.Checkdeep-fryersduringuse;superheatedoilmaybe

ammable.

Cleaning

• Thesaturationofgreasyresidueinthefanandltersmaycauseincreasedinammability.Keepunitcleanandfreeof

grease and residue build-up at all times to prevent possible res.

• Filters must be cleaned periodically and free from accumulation of cooking residue (see Cleaning Instructions below).

Old and worn lters must be replaced immediately.

• DO NOT operate fans when lters are removed. Never disassemble parts to clean without proper instructions.

Disassembly is recommended to be performed by qualied personnel only. Read and understand all instructions and

warnings in this manual before proceeding.

SAFETY WARNING: Never put your hand into area housing the fan while the fan is operating!

For optimal operation, clean range hood and all bafe/spacer/lter/grease tray/oil container regularly. Regular care

will help preserve the appearance of the range hood.

Cleaning Exterior Surfaces

• Clean periodically with hot soapy water and clean cotton cloth. DO NOT use corrosive or abrasive detergent (e.g. Comet

Power Scrub®, EZ-Off® oven cleaner), or steel wool/scoring pads, which will scratch and damage the stainless steel

surface. For heavier soil use liquid degrease such as “Formula 409®” or “Fantastic®” brand cleaner.

• If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting

cleaning solution onto or into the control panel. Follow directions of the stainless steel cleaner. CAUTION: DO NOT

leave on too long as this may cause damage to hood nish. Use soft towel to wipe off the cleaning solution, gently

rub off any stubborn spots. Use dry soft towel to dry the hood.

• After cleaning, you may use non abrasive stainless steel polish such as 3M® or ZEP®, to polish and buff out the

stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

• DO NOT allow deposits to accumulate or remain on the hood.

• DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface and cause rusting.

• DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel

for extended periods. Many of these compounds contain chemicals, which may be harmful.

• Rinse with water after exposure to these compounds and wipe dry with a clean cloth.

Loading ...

Ancona AN-1156 WRP430 30 in. Convertible Wall Mounted Range Hood with LED Lights in Stainless Steel